Security Level Change Operation - Mitsubishi GO T1000 User Manual

11.4.3 Security level change operation

1 Password input operation
Remark
About forgetting to return to the original level after changing security level temporarily
When use GOT after temporarily changing the security level, do not forget to return
the security level to the original level.
1 By touching 0 to 9
password of the changed security level is
input.
2 When correcting the input character, touch
key to delete the correcting character
Del
and input the password again.
3 After inputting password, touch the
key.
When the password matches, a message
notifying successful change of the security
level is displayed.
When the password does not match, an
error message is displayed.
4 If button is touched it returns to the
OK
password input screen again.
5 If button is touched it returns to
security setting screen.
11.4 Security Level Change
11.4.3 Security level change operation
, A to F key, the
Enter
11 - 13
9
10
11
12
13
14
15
16