Display And Operation Settings (Got Set Up); Display Settings; Display Setting Functions - Mitsubishi GO T1000 User Manual

11. DISPLAY AND OPERATION
SETTINGS (GOT SET UP)
Setting screen for display and setting screen for operation can be displayed from GOT setup.
In the setting screen for display and the setting screen for operation, the following settings can be set.
Screen
Setting screen for display
Setting screen for
operation

11.1 Display Settings

11.1.1 Display setting functions

Setting regarding display is possible.
The items which can be set are shown below.
Items
Opening screen time
Screen save time
Screen save backlight
Language
Brightness, Contrast
*: If setting 0, the title screen is not hidden.
The title screen is always displayed for 4 seconds or longer (which changes depending on the project data
contents).
Opening screen time, screen save time, screen save backlight, language
Brightness, contrast
Buzzer volume, window move buzzer
Security setting
Utility call key
The title display period at the main unit boot can be set.
The period from the user stops the touch panel operation
till the screen save function starts can be set.
Whether turn ON or OFF the backlight simultaneously at
the screen save function start can be specified.
Confirmation of the current language and switching
language can be performed regarding with the language
displayed by utility and dialogue.
The brightness or contrast can be adjusted.
Section 11.2 Brightness, Contrast Adjustment
(1) Display setting by GT Designer2
Set title display period, screen save time and screen save backlight at [GOT set
up] in [System Environment] of GT Designer2.
When change a part of the setting after downloading the project data, change the
setting by [Display] screen of the GOT.
GT Designer2 Version
(Section 3.8 Setting of the GOT display and operation (GOT setup) )
(2) Screen save and screen save backlight OFF function
When using the screen save and screen save back light OFF function, select
valid/invalid by the system information reading device in [System Environment] of
GT Designer2.
For system information details, refer the following.
GT Designer2 Version
(Section 3.6 Setting System Information)
Description
Contents
Screen Design Manual
Screen Design Manual
11.1 Display Settings
11.1.1 Display setting functions
Reference page
11-1
11-6
11-10
11-12
11-14
Setting range
*
0 to 60 seconds
<At factory shipment: 5 seconds >
0 to 60 minutes
<At factory shipment: 0 minutes>
When set to 0, the function
becomes invalid.
ON/OFF
<At factory shipment: OFF>
Japanese/English
<At factory shipment: Japanese>
11 - 1
9
10
11
12
13
14
15
16