Troubleshooting For Monitoring - Mitsubishi GO T1000 User Manual

18.3 Troubleshooting for Monitoring

This section describes the countermeasures when GOT does not display the monitor screen.
GOT does not display the screen
GOT POWER LED is lit in orange
The possible cause is a GOT hardware fault.
Please consult your nearest sales office or FA Center, explaining a detailed description
of the problem.
*1
*2
18 - 7 18.3 Troubleshooting for Monitoring
POWER LED of GOT is off.
NO
NO
System Information
function (System Signal 1)
is set.
NO
GOT POWER LED blinks
in orange/green
NO
For utility menu, refer to the following.
Chapter 11 DISPLAY AND OPERATION SETTINGS (GOT SET UP)
For the details of the forced screen saver enable signal, refer to the following.
GT Designer2 Version
Section 3.6 System Information Setting
YES
Turn on the power supply of GOT
Backlight OFF during screen saving is set.
YES
The setting of screen saving can be set
in the GOT utility menu. *1
The bit of Forced Screen Saver Enable
YES
Signal may be ON. Confirm the bit status.
When "ON", set the bit to "OFF". *2
Backlight bulb is blown.
YES
To replace the backlight, contact your nearest
sales office or FA Center.
Screen Design Manual