15 of the FCC Rules. Operation is subject to The product must not be modified in any way. the following two conditions: HAY accepts no responsibility for any products that have been modified or tampered with. The ∆ This device may not cause harmful external flexible cable or cord of this luminaire interference.
Page 4
– PARTS – Lamp Shade NB: Comes in three different sizes Adapter Power supply...
Page 5
Unpack all the parts and check that you have received all the parts listed. Plug the trailing cable into the power supply. Attach the correct adapter for your region. The lamp is now ready for use.
Page 7
– NOTE – If your lamp needs any parts replacing, it is possible to dissassemble the light engine from the glass. Make sure the lamp is disconnected from the power supply. Turn it upside down and unscrew the two screws slightly but not all the way.
Page 8
Turn the light engine counterclockwise until the two screws are free from the hooks on the bracket, tilt the light engine and pull it out from the glass shade. Now you can replace any broken parts with original HAY replacement parts.
Page 9
Place the light engine back into the glass shade and turn clockwise, locking the two screws into the hooks on the bracket. Then use a screwdriver to fasten the two screws to ensure the light is properly assembled. The lamp is now ready to use again.
– CARE & MAINTENANCE – Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific materials to prolong the life of your lighting. Please find our Care & Maintenance...
Need help?
Do you have a question about the Parade and is the answer not in the manual?
Questions and answers