LED Indicator and Motor Sounds
Upon powering on the ESC, the LED will blink and the motor will
emit a series of beeps to indicate its status.
First it will display the battery mode selection, second the drag
brake setting, and then it will indicate it is ready to operate.
Feature
Ni-MH/Ni-CD Battery
2S Li-Po Battery
v Li-Po Battery
ESC Ready
During Operation
Stop
Forward Partial Throttle
Full Throttle
Reverse Partial Throttle
Full Throttle
Partial Brake
Full Brake
Battery Low Voltage
Overheat
16
LED Status
1 Blink
2 Blinks
3 Blinks
1 Long Blink
Motor Sound
1 Short Beep
2 Short Beeps
3 Short Beeps
1 Long Beep
LED Status
OFF
Blinks
Solid
Blinks
Solid
Blinks
Solid
Blinks
Blinks