Table of Contents
Advertisement
Programming the ESC via the SPMXCA200
Program Box
1. Begin with no battery connected.
2. Connect the cable for the programming box into the program-
ming port as shown.
3. Connect a battery and power ON the ESC.
OPTIONAL: The ESC settings can be reset to default by press-
ing "Reset" and then "OK" buttons.
4. Press Select button on the program box once.
5. Select the programming choices. Press SAVE after any
changes are made.
6. Power off the ESC.
7. Disconnect the cable for the programming box.
13
Advertisement
Table of Contents
