Table of Contents
Advertisement
Wiring Diagram
Power
Programming
Button
Bullet
Connectors
Between ESC
and Motor
NOTICE: Always disconnect the battery from the ESC when
you have finished operating your vehicle. If you leave the
battery connected with the power switch in the OFF position,
the ESC will continue to draw current when connected to the
battery, resulting in possible damage to the battery through
over-discharge.
NOTICE: Do not connect a dedicated receiver battery to the
servo or programming ports. When the ESC/Receiver is turned
On it will provide the servo ports with 6V regulated power from
the main battery. If a dedicated receiver battery is connected to
the servo ports, the ESC/receiver may be damaged.
Auxiliary (Light)
Connectors
Throttle
Connector to
Receiver
Programming Port
LED
IC3 Power
Input
Connector
Heatsink
9
Advertisement
Table of Contents
