Self Timer - Hitachi VM-SPIA Instruction Manual

SELF TIMER

SELF TIMER
The self timer allows you to automatically start recording after about 10 seconds. Use
the remote control provided to operate the self timer.
1. Make sure that the remote control battery is loaded in the remote control. (See page
11.)
2. Point the remote control at the receiver on the camera/recorder.
3.Press "SELF TIMER" button on the remote control. The display will change as follows
each time the button is pressed.
4. Press "START/STOP" button on the remote control (or the camera/recorder).
• When "SELF 30REC 0:10" is displayed, the camera/recorder starts recording after 10
seconds, continuing for 30 seconds.
• When "SELF RECORD 0:10" is displayed, the camera/recorder starts recording after
10 seconds. Recording continues as long as the "START/STOP" button is not pressed.
5. Press "START/STOP" button to stop self timer recording.