Time Remaining - Hitachi VM-SPIA Instruction Manual

TIME REMAINING

TIME REMAINING
When the linear time counter with memory is present in the viewfinder, pressing
"DISPLAY" button again will change the display to a read-out showing the amount of
recording or playback time left on the tape.
NOTE: When using the E6-15 minutes tape or P6-15 minutes tape, you must press
"RESET" button to display the "E-15" or "P-15" to adapt the camera/recorder's time
remaining system for an accurate read-out. (If the counter is being displayed, "RESET"
button resets the counter to "0:00:00".