Table of Contents
Advertisement
DATE/TIME SETTING
DATE/TIME SETTING
The date and time can be recorded on your tapes to act as a handy reference when
viewing them at a later time. Use the following procedure to set up this display for the
current date and time.
1. Load the camera/recorder's date/time battery as described on page 11.
2. Turn the operate control to select "ZOOMx16", "ZOOMx64", "EXPAND" or "SLIM".
3. Press "DATE" button.
Date and time appear in the viewfinder and "1" flashes.
4. Press "SET" button to select correct month. Hold button down to advance rapidly.
When the correct month appears, press "SHIFT" button.
5. Press "SET" button to select correct date. Hold button down to advance rapidly.
When the correct date appears, press "SHIFT" button.
6. Press "SET" button to select year, and then press "SHIFT" button.
7. Press "SET" button as many times as may be required to select correct hour, and
then press "SHIFT" button.
8. Repeat steps 7 to select minute and AM/PM.
Advertisement
Table of Contents
