Camera/Recorder To Vcr Dubbing - Hitachi VM-SPIA Instruction Manual

CAMERA/RECORDER TO VCR DUBBING

CAMERA/RECORDER TO VCR DUBBING
If you wish to exchange or copy some of your friend's favorite home recordings, the
following instructions can be used to connect camera/recorder to VCR for this purpose.
Camera to VCR dubbing hookup Illustration
1. Connect the AV stereo output cord to "AV IN/OUT" of your camera/recorder.
2. Connect the other ends to "AUDIO IN", "VIDEO IN" of your VCR as shown in diagram
above.
3. Play the tape on the camera/recorder and record it on the VCR.
NOTE: If you connect the "VHF OUT TO TV" connector of VCR to the "TV ANT" connector,
as illustrated and set "VCR/TV" selector of the VCR to "VCR" mode, the picture being
dubbed by VCR can be monitored.