Making A Sample Camera Recording - Hitachi VM-SPIA Instruction Manual

MAKING A SAMPLE CAMERA RECORDING

MAKING A SAMPLE CAMERA RECORDING
1. Open the case.
Refer to "WATER-RESISTANT" on page 8.
2. Connect either one of the POWER SOURCES on pages 12 and 13.
3. Slide "EJECT" switch and insert tha cassette so the transparent window is toward
you and the arrow toward the cassette holder. Slide the cassette into cassette holder as
far as it will go.
NOTE: If the power source is not connected to the camera/recorder, the cassette holder will
not open.
4. Press the cassette holder. The holder will latch in the operating position. The
camera/recorder will enter record/pause mode automatically.
5. Hold the left and right side of the case tightly and lock the buckle securely.