Sharp MX-C407P User Manual page 62

Understanding the printer menus
Menu item
Backup DNS Address
Backup DNS Address 2
Backup DNS Address 3
Domain Search Order
Enable DDNS
Off*
On
DDNS TTL
Default TTL
DDNS Refresh Time
Enable mDNS
Off
On*
WINS Server Address
Enable BOOTP
Off*
On
Restricted Server List
Restricted Server List Options
Block All Ports*
Block Printing Only
Block Printing and HTTP Only
MTU
256–1500 Ethernet (1500*)
Raw Print Port
1–65535 (9100*)
Outbound Traffic Maximum
Speed
Off*
On
Enable TLSv1.0
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the backup DNS server addresses.
Specify a list of domain names to locate the printer and its resources that reside
in different domains on the network.
Update the Dynamic DNS settings.
Specify the current DDNS settings.
Update the multicast DNS settings.
Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign a printer IP address.
Specify the IP addresses that are allowed to communicate with the printer over
TCP/IP.
Notes:
•
Use a comma to separate each IP address.
•
You can add up to 50 IP addresses.
Specify the access option for IP addresses that are not in the list.
Specify a maximum transmission unit (MTU) parameter for the TCP connections.
Specify a raw port number for printers connected on a network.
Set the maximum transfer rate of the printer.
Note: When enabled, the option for this setting is 100–1000000
Kilobits/second.
Enable the TLSv1.0 protocol.
62