Sharp MX-C507P User Manual page 53

Understanding the printer menus
Menu item
Auto LF after CR
Off*
On
Tray Renumber
Assign MP Feeder
Assign Tray [x]
Assign Manual Paper
Assign Manual Envelope
View Factory Defaults
Restore Defaults
Print Timeout
Off
On* (90 seconds)
Note: An asterisk (*) next to a value indicates the factory default setting.
HTML
Menu item
Font Name
Times*
Font Size
1–255 (12*)
Scale
1–400% (100*)
Orientation
Portrait*
Landscape
Margin Size
8–255 mm (19*)
Backgrounds
Do Not Print
Print*
Note: An asterisk (*) next to a value indicates the factory default setting.
Image
Menu item
Auto Fit
On
Off*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to perform a line feed after a carriage return control
command.
•
Configure the printer to work with a different print driver or custom
application that uses a different set of source assignments to request a
given paper source.
•
Show the factory default value assigned for each paper source.
•
Restore the tray renumber values to their factory defaults.
Set the printer to end a print job after it has been idle for the specified
amount of time.
Description
Set the font to use when printing HTML documents.
Set the font size to use when printing HTML documents.
Scale HTML documents for printing.
Set the page orientation for HTML documents.
Set the page margin for HTML documents.
Print background information or graphics in HTML documents.
Description
Select the best available paper size and orientation setting for an image.
Note: When set to On, this menu item overrides the scaling and orientation
settings for the image.
53