Table of Contents
Advertisement
15. Under Fire-wire connection, is not detected by MAC G5 if is powered on
before MAC G5 is powered on the subsystem?
The problem is due to the Fire-wire chip manufacturer F/W driver issue. To
solve this issue, you can choose either :
1. Always power on MAC G5 before power on
2.
Unplug the Fire-wire connector from MAC G5 then re-plug it again
16. Under Windows 2K/XP/2003 OS with 2 partitions (NTFS / FAT32), the FAT32
partition may crash after running for days.
The problem is due to the Fire-wire/USB chip manufacturer F/W driver issue. To
solve this problem, you can only use one file system for all the partitions.
17. Under Linux OS and with USB connection to host, it shows I/O error or data
error.
The problem is due to the Fire-wire/USB chip manufacturer V1.06 F/W driver. To
solve this problem, you can choose either :
A.
Not to use USB connection for Linux OS
18. When cascade more than two subsystem with using 1394 Daisy-Chain
connection, one of the subsystems may not be detected after running days.
The problem is due to the Fire-wire/USB chip manufacturer F/W driver issue
and has been fixed with the new firmware released. To solve this problem, you
can download
-A-5-
Appendix A – FAQ
.
Advertisement
Table of Contents
