easyRAID S4-FWTT User Manual page 60

User's Manual
Example:
<2134>: disk 2 and disk 1 sequence is reversed.
<13x4>: the original disk 3 is put into tray 2 and the original disk 2 is not
plugged or failed.
Condition 3
R A I D
C o d e : 2
Note: The RAID has been failed but all of 4 disks exist. Since F/W Version
1.4 or later.
Solution: To create a new RAID or you should call vendor to try to save the
data from system.
Condition 4
B a t t e r y
Note: Battery is low, missing, or failed.
Solution: Please contact with your distributor or vendor to change a new
battery
Condition 5
F a n
Note: Fan is low, missing, or failed.
Solution: Please contact with your distributor or vendor to change a new Fan.
14. Why can't I use with Windows 98 on a USB2.0 host interface?
We recommend user NOT to use Windows 98 because Windows 98 is too old
and not compatible with many cards. Please refer to Chapter 4, the OS
compatible list table.
F a i l
F a i l e d
F a i l e d
-A-4-