Hi-Touch Imaging Technologies CS-300 User Manual page 20

※When you select the YMCKO ribbon as your ribbon type, several options for
Resin K will be available.
Disable
Always on
Text only
Disable when doing
color printing
Black/White
Resin Dither
NOTE:
1. Graphical Device Interface, a Windows standard for dividing the images to many
graphical objects and transmitting them to output devices, such as monitors and
printers.
2. It is recommended to select "Disable doing color printing" if you are not going to use
Card Désirée CS to print.
※
When you select
for the Resin K ribbon will be available: Black/White and Resin Dither.
Black/White
Resin Dither
The "Resin K" within YMCKO ribbon will not be applied to
print the black section and the black (RGB = 0, 0, 0) in
graphical objects. It means the color in black (RGB = 0, 0, 0)
will always be composed by Y, M and C.
The "Resin K" within the YMCKO ribbon will be applied to
print all of the black (RGB = 0, 0, 0) in the images.
The "Resin K" within YMCKO ribbon will be applied to print
the graphical object- "Text" which is transmitted by GDI
command, but will not be applied to the black part in the
images or the black (RGB = 0, 0, 0) of the graphical objects
transmitted by the GDI command. For example, the Barcode
is transmitted by the GDI command, but this option will not
apply to Resin K within the YMCKO ribbon to the Barcode.
The "Resin K" within the YMCKO ribbon will be applied to
print all the black (RGB = 0, 0, 0) graphical objects that are
transmitted by the GDI command, but will not be applied to
all the black (RGB=0, 0, 0) parts in the images.
The "Resin K" ribbon will represent the color graphic/texts
in black (RGB=0, 0, 0) and white printing style.
Resin Dither applies different density of black-white
mixing to transfer color graphic to different black level. If
the text is the black (RGB=0, 0, 0) graphical object
transmitted by GDI, then the text will not be shown by
mixing color, but by the actual contents.
Resin K ribbon as your ribbon type, then 2 options
The "Resin K" ribbon will represent the color graphic/texts in
black (RGB=0, 0, 0) and white printing style.
Resin Dither applies different density of black-white mixing
to transfer color graphic to different black level. If the text is
the black (RGB=0, 0, 0) graphical object transmitted by GDI,
then the text will not be shown by mixing color, but by the
actual contents.
20
www.hi-ti.com