1. Manuals
  2. Brands
  3. Hi-Touch Imaging Technologies Manuals
  4. Printer
  5. 63xPL/PS
  6. User manual

Hi-Touch Imaging Technologies 63xPL/PS User Manual

Hi-touch imaging technologies photo printer user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HiTi Photo Printer
63xPL/PS

User Manual

Advertisement

Table of Contents
loading

Related Manuals for Hi-Touch Imaging Technologies 63xPL/PS

Summary of Contents for Hi-Touch Imaging Technologies 63xPL/PS

  • Page 1: User Manual

    HiTi Photo Printer 63xPL/PS User Manual...
  • Page 2 COPYRIGHT The information contained in this document is subject to change without notice. Hi-Touch Imaging Technologies makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

  • Page 3: Fcc Information

    SAFETY INSTRUCTIONS 1. Read these instructions carefully. Save these instructions for future reference. Follow all warnings and instructions marked on the product. 2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3.
  • Page 4 instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If these equipment doses cause harmful interference to radio or television reception, which can be determined by interference by on or more of the following measures: 1.
  • Page 5 CE Information...

  • Page 7: Chapter 1. Welcome

    Chapter 1. Welcome 1-1 Our Invitation to HiTi Photo Printer Family It is our pleasure to have you onboard as the member of HiTi Photo Printer family. We thank you for your patronage and hope this is just the beginning of our long-term association.
  • Page 8 USB feature. Titan of Software Program Our Desiree is a perfect tool that will perpetuate your Photo Printer to its optimal performance. Flexible in design, the software allows you to be creative and innovative. Photo image, calendar, stickers, and many other features will be just a finger away.
  • Page 9 1-2 Inside view of HiTi Photo Printer Led Light Turn the power on. The printer will automatically start to initialize and LED blinking green color about 5 seconds. Then LED turn to stable green color. If not, please begin to check. Paper Cassette This is the paper holder for you to insert the paper into.
  • Page 10 Ventilation Holes Ventilation holes are located in the front and back of the printer. Please allow adequate airflow by removing all matters from the surface of the ventilation holes. These holes are designed to cool down the printer during operation. ID Button To replace used cartridge.
  • Page 11 Power Switch This is where printer can be turned on or off. Power Socket Connect your power line here. USB Connector Please connect USB cable to the connector to your other device, such as PC and other peripheral devices. Specification Label Printer specification and detail information.

  • Page 12: Chapter 2 Quick Installation

    Standalone Operation Flow (63xPS) 1. Introduction of the Controller The HiTi Photo Printer 63xPS Controller provide a full-function printing interface, the details are as follows: MENU - 1.6 inches TFT LCD : Totally 60K pixels and full color (24bit) performance on the panel, all the images preview, editing and printing related information is accessible through the OSD (On Screen Display) design.
  • Page 13 - OK : Confirmation. Confirm the image chosen or the result of the image editing. - ESC : Escape to the upper layer or cancel the current job. - Menu : The main page of the OSD. Note: All the jobs in process will be aborted at the same time.
  • Page 14 Press Print again to reconfirm and start printing Note: If two cards (CF and SM) have been already inserted, printer will only let the card inserted first active, if you want to change the memory card status, please: -Pull out the other card -Enter the Setup page and run the card selection switch Information for Preview Page: The images in Preview Page are the thumbnail of all the images captured by...
  • Page 15 -Enhance: Brightness: Right for increase and Left for decrease Contrast: Right increase and Left for decrease Color R/G: Right for more red tone and Left for more green tone Color B/Y: Right for more blue tone and Left for more yellow tone OK: Save the change in enhance and back to Image Editing Page -OK: Save the change and back to Preview Page Note:...
  • Page 16 Select (A-D) , the layout of your favorite, and press OK to enter the Preview Page Select the image you want to print, press OK to confirm Note: It takes 5 to 10 seconds to decode the image file Move to another position in A-D, and continue selecting the image to be printed Once the full page of sticker is occupied, press Print to print the sticker Press Print to reconfirm and start printing...
  • Page 17 1. Please insert "Software CD" into CD-ROM drive. 2. If CD-ROM does not auto start, please double click My Computer Icon in your Window and double click your CD-ROM drive. 3. Select "Install HiTi Photo Printer 63xPL/PS Driver" and install.
  • Page 18 4. When you begin install you will see the following screen. 5. When finish, Install Program will ask you to make this printer as default or not.
  • Page 19 2-4 Install Driver (Win2000) 1. Please insert "Software CD" into CD-ROM drive. (Do not plug USB cable to printer or PC this time). 2. If CD-ROM does not auto start, please double click My Computer Icon in your Window and double click your CD-ROM drive.
  • Page 20 3. Select "Install HiTi Photo Printer 63xPL/PS Driver" and install. 4. When you begin install you will see the following screen.
  • Page 21 5. The Windows 2000 system will display a warning message of “Digital Signature Not Found.” Please press “yes” to continue. 6. Then will disappear this message to tell you finishing. Press OK to continue. 7. At this time, connect USB cable to printer and PC, then power on the machine.
  • Page 22 8. Windows 2000 make sure this is a USB device. 9. Windows 2000 begin to search a device driver have already installed on system. 10. Found a driver without “Digital Signature Not found” warning message. Please press “Yes” to continue. 11.
  • Page 23 2. If CD-ROM does not auto start, please double click My Computer Icon in your Window and double click your CD-ROM drive. 3. Select “Install HiTi Photo Printer 63xPL/PS Driver” and install. 4. When you begin install you will see the following screen.
  • Page 24 5. Connect USB cable to printer and PC, then power on the machine. 6. Windows XP begins to search a device driver have already installed on system. 7. Windows XP shows driver incompatibility, press “Yes” to continue installation...
  • Page 25 8. After copy several files, the Windows XP system recognize this printer. Installation is finished.
  • Page 26 2-6 Install PhotoDesiree 1. Please insert "Software CD" into CD-ROM drive. 2. If CD-ROM does not auto start, please double click My Computer Icon in your Window and double click your CD-ROM drive. 3. Select "Install PhotoDesiree " and install. 4.
  • Page 27 2-7 Load paper and ribbon 1. There are 3 types of HiTi paper. Photo Paper (portrait view) 4x4 sticker 4/2/4 sticker...
  • Page 28 2. While taking out the paper, please take the longer exterior part of the tear line, in order to prevent your fingerprint on the paper. 3. Please follow the correct way to hold the paper.
  • Page 29 4. Make sure the tear-line under the longer exterior aimed at the notch in paper tray. 5. Press the upper "ID button" to open the "Ribbon Door".
  • Page 30 6. Use your right hand to take right-lower "Ribbon Cartridge" handler. 7. Hold the "Ribbon Cartridge" and place it inside the printer. Please pay attention to meet the “Drive” while putting the "Ribbon Cartridge". 8. When you finished, close "Ribbon Door". 9.

  • Page 31: Install Hardware

    2-8 Install Hardware 1. Connect "Power Cord" to "AC power connector". 2. Connect "USB Cable" to printer. Connect the other side to PC.
  • Page 32 3. Turn on "AC power Switch". 4. When LED turns stable green, the printer is ready. If LED turns green blinking or orange, please check all the printer status. 5. You will see "New Hardware found" message on the screen. 6.
  • Page 33 2-9 Print 1 Photo 1. Click the image from the Left Window. 2. Change layout style to portrait.
  • Page 34 3. Fit to width. 4. Press "Drag Down to Queue" icon. 5. Press "Print" icon , then Print it. 6. If success, you will see print progress bar appear.

  • Page 35: Chapter 3. Photodesiree

    Chapter 3. PhotoDesiree This chapter is devoted to provide you with comprehensive detail information on the functions of our PhotoDesiree software. PhotoDesiree gives you quality studio result inside the crazy surroundings of your computer. It changes ordinary to extraordinary. It is the vehicle that brings countless moments alive.
  • Page 36 Before you run PhotoDesiree, please preset your display at resolution of 800 x 600 pixels or 1024 x 768 pixels and Hi Color (16bit or higher) or True Color (24 bit) mode.
  • Page 37 3-2 Basic Operation Concepts Follow the step for printing. Step A: Select image file. Step B: Layout your image, Adjust color effects. Step C: Drag to Print Queue, then print.
  • Page 38 1. Mouse select originated function. When you open file, you can drag mouse to select multiple files. 2. Drag and Drop operation. We can do 2 styles drag and drop. Path A: file windows layout windows. Path B: Printing queue Layout windows.
  • Page 39 3. HTF format file When you drag HTF (HiTi Format) format file, screen will display following message. HTF : special format for HiTi PhotoDesiree. HTF is including original printing data and original layout. HTF as COLLECTION: You can save HTF, as your editing/layout project file.
  • Page 40 3-3 Functional Icons PhotoDesiree can be started from the shortcut in the Windows Start menu or double clicking icon on your desktop. File Window Add Image Twain DPOF Thumbnail View Detail View Delete Direct Indexed Printing Right pointing Arrow Brings you images or files that you wish to view and refine.

  • Page 41: Layout Window

    Layout Window Photo paper Sticker 4X4 Sticker 4/2/4 Fit to Height Fit to Width Delete All Edit in ImagEnhancer Edit External Image Editor Gray scaled icon Save Image It is full selection of printing formats. Standard A6 photo and variety of different format can be comprised in this section.
  • Page 42 Send to Printer Queue Queue Window Photo paper, Sticker 4x4 and Sticker 4/2/4 Load, Save, Delete to Album Gray scaled icon Print Queue Delete All Images from Queue Click your downward arrow to execute your printing function by placing the images into the bottom window.
  • Page 43 3-4 Photo printing 1. Click the image from the Left Window. 2. Change layout style to portrait.
  • Page 44 3. Fit to width. 4. Click the downward arrow for printing queue. 5. Click the "Print Queue" icon for print out.
  • Page 45 3-5 ImagEnhancer: light on your photo 1. Click the image from the Left Window. 2. Change layout style to portrait.
  • Page 46 3. Fit to width. 4. Click on editor for ImagEnhancer. Templates of different designs will appear on the left window.
  • Page 47 5. Double click your favorite template. 6. Click on the Text Icon to key in your content, such as “My girl friend Lisa”, and choose correct font style.
  • Page 48 7. Click the finish check on the bottom right. 8. Click the downward arrow for printing queue. 9. Click the Print Queue for print out.
  • Page 49 3-6 Calendar 1. Click the image from the Left Window. 2. Click on editor for ImagEnhancer. 3. Click on the top add calendar. 4. Click year and month follow by type of format and background color. Click the finish check on the bottom left.
  • Page 50 5. Click the finish icon on the bottom and click finish check icon on the follow page. 6. Click the downward arrow for printing queue. 7. Click the Print Queue to print out.
  • Page 51 3-7 ID Picture 1. Click the image from the Left Window. 2. Click on Photo Icon and drag the box right below Photo Icon and select ID One Inch or Two Inches. 3. Drag the box right next to the ID card box for picture combinations. 4.

  • Page 52: Business Card

    3-8 Business Card 1. Click the image from the Left Window. 2. Click on Photo Icon and drag the box right below Photo Icon and select Business Card. 3. Drag the box right next to the business card box for picture combinations. 4.
  • Page 53 5. Click on the Text Icon on the top for text editing and color selection. Finish by Clicking Ok Icon. 6. Click on the bottom left for color and contrast adjustment or Click on the bottom right for rotation and size adjustments. Click the finish check on the bottom right and return back to main menu.
  • Page 54 7. Click the downward arrow for printing queue. 8. Click the Print Queue for print out.
  • Page 55 3-9 Book Marker 1. Click the image from the Left Window. 2. Click on Photo Icon and drag the box right below Photo Icon and select Book Marker. 3. Drag the box right next to the Book Marker box for picture combinations. 4.
  • Page 56 3-10 Sticker 1. Click the image from the Left Window. 2. Click on Sticker Icon. 3. Drag the box right next to the Sticker box for picture combinations. 4. (If need) Use ImagEnhancer to Add colored and transparent text. Add colored and transparent calendar. Rotate and resize photo.
  • Page 57 3-11 Magic Coating and Mirabella Entering into the Magic Coating function, you may choose the built-in horoscope signs or Twelve Branches patterns, or import your image to do some watermark editing: 1. Duplicate to full page (Duplicate): you can decide whether or not import your image to the full page duplication 2.
  • Page 58 You may decide to use which method to convert you color graphic file into a black and white watermark file. 1. Threshold Method (Threshold): The threshold method will convert the image to a black and white graphic file with large contrast. 2.
  • Page 59 After the configurations are set up, you can save it as a self-defined template for later use. Mirabella Mirabella makes use of the analytical printing method to have 9 kinds of unspecific effects for the image. You just need to select your favorable color expression on the monitor screen directly, and you can adjust the color of the image immediately.

  • Page 60: Chapter 4. Driver Details

    Chapter 4. Driver Details 4-1 Driver Setting (Win98) You can find driver setting under Control Panel/Printers. Just choose it and right click “Properties”, the display every details. The printer driver is divided into six different categories:...
  • Page 61 4-1-1 General This Category gives you greater flexibility in printing out photo of your liking. It prints out draft copies of your photos with selection window on the top for image selection and page divider. Upon selecting your photos, please click the bottom preview bottom for draft print out for your review.
  • Page 62 4-1-2 Details Connect to the below printer icon gives you a selections of various different printers or paths that have been preinstalled into the system. You can drag down the right arrow to make your selection. Use the printer driver below for printing icon provides a full range of driver that you could utilize for printing.

  • Page 63: Color Management

    4-1-3 Color Management This feature allows you to connect or disconnect from various different software setting that will effect the coloration of the printer out. You may selection them from the window below. Please press Add or Cancel bottom to make your selection.
  • Page 64 4-1-4 Sharing This feature is ONLY available when you install “Microsoft Networks". It is using this printer in a local LAN environment. You can share it as a public printer,...
  • Page 65 4-1-5 Setting Photo type combo box identifies output format of your photo. You may select from “photo”, “sticker 4/2/4” and “sticker 4x4” Orientation gives you a choice between portraits of landscape setting by clicking the small circle. Titles Gives you a choice between Full Page or 2” ID photo Printer mode Provides range of printer speeds for your selection.
  • Page 66 4-1-6 Tools...
  • Page 67 Position Calibrating 1. According to your print out, choose the perfect one that matches the sticker dimension. 2. You must fill in the number of PART A and PART B in order to adjust the horizontal and vertical margin. Color Preference Setting 1.
  • Page 68 4-1-7 About This section shows the detail copyright information of this driver and web site address for any inquiries.
  • Page 69 4-2 Driver Setting (Win2000) You can find driver setting under Control Panel/Printers. Just choose it and right click “Properties”, the display every details. In Windows 2000, it is very similar with Windows 98 setting. We only introduce the difference between Win98 and Win2000. If other part we not mentioned, please take reference with same part on Windows 98.

  • Page 70: Printer Preferences

    4-2-2 Printer Preferences When you press “Preference” will appear 3 tabs. These 3 tabs functions are the same as win98 driver. Please "win98 driver settings" for details.
  • Page 71 4-2-3 Ports HiTi printer will create “virtual Printer port” for printing through USB. All you need to do is to make sure that your Printer status is “Connected”.
  • Page 72 4-3 Preview function in driver In Windows 98 /2000, the preview part is the same. Function: Before you printing, if you have checked the box of “Run preview” from the contents of “Setting” tab, preview application will run for the final checking.

  • Page 73: Uninstall Driver

    4-4 Uninstall Driver 4-4-1 Uninstall Win98 driver Driver Uninstalling happened on: If you want to complete uninstall your printer driver, or you want to change new driver. 1. Action: Use Control Panel/Printers/ Choose "Uninstall HiTi USB Photo Printer 63xPL/PS", then press "Add/Remove".
  • Page 74 2. Then begin to uninstall driver. 3. Wait the program finished this procedure. 4. Uninstall program will prompt you to restart Windows.
  • Page 75 4-4-2 Uninstall Win2000 driver 1. Under Control Panel/Add Remove Programs, you can find "Uninstall HiTi USB Photo Printer". 2. Then begin to uninstall driver. 3. No system restart required. Finished Uninstall driver.
  • Page 76 4-4-3 Uninstall WinXP driver 1. Under Control Panel/Add Remove Programs, you can find “Uninstall HiTi USB Photo Printer”. 2. Then begin to uninstall driver.
  • Page 77 3. Uninstall program will prompt you to restart Windows.

  • Page 78: Chapter 5. Troubleshooting

    Chapter 5. Troubleshooting Please follow the instructions given below for troubleshooting when you have problems with printing: Identify the problem by the orange indicator on the machine. Refer to Section 5.1 for troubleshooting. Alternatively, the screen displays error messages. Refer to Section 6.2 for troubleshooting.
  • Page 79 6 times Paper type mismatch. For example, it is set up for “sticker” in the software, but the tray has “photo paper”; or paper other than the standard paper produced by Hi-Ti may have the same problem. 7 times Memory is insufficient. Such problem generally arises when the PC is busy in processing...
  • Page 80 several I/O operations in the hard disk for the application programs; for example, Photoshop is editing graphic file of large size; (4) Insufficient hard disk space; (5) Insufficient onboard memory 8 times Improper action of printer head assistance. Please reboot and check if the printer can automatically resume normal operation.

  • Page 81: Error Message And Solution

    5-2 Error Message and Solution If you see error message on the screen, do not press [Yes] immediately, record the message first. Please follow the method described in this section for troubleshooting. Note: After you press [Yes] in the error message window, the printer will reset, and the problem may be cleared during “Reset”.
  • Page 82 number (about 5 to 10), the temperature may be too high and needs to cool down. When the temperature of operating environment is too high, it may have the same problem. Do not use a consumer printer for commercial printing operation. Ribbon door Ribbon cartridge is not open.
  • Page 83 ReadFile time described as follows: The out; or problem usually comes from the PC that is processing other job Printer data consuming lots of system underrun; or resources, and printing data transmits to the printer unsuccessfully Allocate cause by the following memory fail;...
  • Page 84 The resolution The resolution of the of the monitor screen should be set to setting is too 800X600 or above to make the bundled “PhotoDesiree” software run properly. Please set the resolution of the screen to 800X600 or above. You may set the resolution of the screen at the Windows [Start]/Control panel]/[Monitor]/[Setup].

  • Page 85: Chapter 6. Q&A Of Frequently Asked Questions

    Chapter 6. Q&A of Frequently Asked Questions Operation Problem Installing and Uninstalling Driver Printing Problem Photo output quality Problem Where Can I Get Service for This Product Basic Requirements for Widnows Operating System Problem of Running PhotoDesiree...

  • Page 86: Operating Problem

    Please use Hi-Ti photo paper and sticker. How to get the driver of Hi-Ti Digital Photo Printer? When you purchase Hi-Ti Digital Photo Printer, the driver is bundled in a CD. In addition, you also can download it from the Hi-Ti website: http://www.hi-ti.com/downloads.html...
  • Page 87 Q14: What is the interface between the Hi-Ti Digital Photo Printer and PC? A14: Universal Serial Bus (USB). Q15: What is the compatible USB port for the Hi-Ti Digital Photo Printer? A15: USB Port Versions 1.0, 1.1, and 2.0.
  • Page 88 Q21: When should I change the ribbon cartridge? A21: The Hi-Ti Photo Printer - 63xPL/PS will detect the ribbon cartridge automatically. When the ribbon cartridge is used up, the message of “Out of ribbon”...
  • Page 89 Photo Printer, or get more information from the Hi-Ti website: http://www.hi-ti.com/Taiwan/wheretobuy.htm Q28: If I am not using the Hi-TiDigital Photo Printer very often, can we put the ribbon cartridge in the printer all the time? A28: Hi-Ti recommends that stores the ribbon cartridge into the sealed palastic bag to avoid moisture, heat, or contamination by dust if the printer is not used for long time.
  • Page 90 Installing and Uninstalling Driver When I see “Add New Hardware” in the Windows 98 SE operating system that I am using before the Hi-Ti Digital Photo Printer driver is installed, what should I do? 1. Cancel the windows of “Installing Driver”.
  • Page 91 3. After you click the installation, the driver window will appear, please select “Yes”. 4. The files will be copied to your hard disk, and the window will show “Do you want to set the Hi-Ti Photo Printer 63xPL/PS as the default printer?” 5. After you selected, the installation is completed.
  • Page 92 How can I uninstall the Hi-Ti Digital Photo Printer driver in Windows 98 SE correctly? 1. Press "Start/Setup/Control panel/Add/Delete Program/Uninstall HiTi USB Photo Printer 63xPL/PS. Press “Add or Delete". 2. The window for uninstalling the printer driver will appear. Press “Start”.

  • Page 93: Printing Problem

    (with a slight noise) to locate the labeled mark on the ribbon. After it is found, the photo printer will start printing. If not, the paper will withdraw. If you hear the sound of rotation, but the printer still shows the error message of “Out of ribbon”...
  • Page 94 1. Make sure the printer and computer are connected properly. 2. Make sure your system configuration meets our minimum requirements. 3. Make sure the Hi-Ti Digital Photo Printer is selected in your application program. The factors of other offline situations may cause by less stable computer system /static of VIA chipset or DIY.
  • Page 95 2. If you open too many application programs, please close them. Or reboot the system. 3. Do not print from 2 different printers (multitasking). 4. Do not log on the network while printing, if the connection quality of your network is poor. 5.
  • Page 96 identify the USB printer, and lower the transmission speed. Intel Chipset Software: Via Chipset Driver: 6. Turn off the printer and PC. Turn on the power again after 5 seconds. 7. If the problem is still there, please contact Hi-Ti or its distributor for assistance.
  • Page 97 Reboot the computer and printer, and print again. 2. Make sure you have installed the Hi-Ti Photo Printer 63xPL/PS driver. Q15: What should I do if I see the error message of “Paper empty” in Windows 98, ME, and 2000 operating system? A15: 1.
  • Page 98 Please refer to related documents and website of manufacturers for color matching systems. 4. To assure the photo printed from Hi-Ti Digital Photo Printer is close to the one you see on screen, please confirm the following: 1) Calibrate your monitor.
  • Page 99 Hi-Ti recommends you to use 1200x1600 or above for printing graphic files. How to improve the problem of printing at incorrect starting point? 1. Check the version of your Digital Photo Printer driver is correct. 2. Check whether the position of paper is placed properly from the torn edge.
  • Page 100 Therefore you have to adjust the size before printing manually. 2. The image processing software, PhotoDesiree bundled with the Hi-Ti Digital Photo Printer provides you the automatic function of matching the photo size. It is recommended to use this software for printing.
  • Page 101 1-inch photo or 2-inch photo. Q19: How do I execute the printing test for “Position calibration” and adjust the setting? A19: 1. Click “Start/Setup/Printer/HiTi USB Photo Printer 63xPL/Contnet/Tool”. 2. Click Color Setting/White Skin Optimization/Printing Calibration Sketch to run the printing test.

  • Page 102: Operating System

    Where Can I Get Service For This Product Where can we get services for the Hi-Ti Photo Printer and its related software? 1. There is an electronic file of User’s Guide bundled in the Hi-Ti Photo Printer. You can get instant service from the “Q&A” in this CD.
  • Page 103 To maximize the function of the Hi-Ti printer and its related software, your system and hardware equipment should have the following configurations or above: PC compatible with Microsoft Windows operating system, and the recommended processor is at least 500 MHz or faster. Microsoft operating system: Windows 98 SE, Windows ME, or Windows 2000 64MB of memory (Recommended 128MB or above).
  • Page 104 What should I do if my graphic file is smaller than the image frame? To avoid too much blank along the edges, you can manually adjust the graphic file according to the proportion by appropriate height, width, or from the image editor of ImagEnhancer to adjust the size until it is the same size of the image frame.
  • Page 105 A16: Link to the Hi-Ti website by clicking the HI-Ti logo on the upper left corner to download the updated functions of this software. Hi-Ti Website︰www.hi-ti.com...

  • Page 106: Specifications

    Specifications Model HiTi 63xPL Print Method Dye Diffusion Thermal Transfer Color Continuous-tone output, 256-level each color Resolution 300x300dpi, equals to inkjet 4800dpi Print Pixel 1200x1800 pixels(300x300dpi), Print Size 4x6 inches Paper Size 4x7 inches with detachable boundary Paper Cassette 25 sheets Ribbon Cartridge 50 prints (YMCO) I/O Interface USB 1.1 Dimensio n (mm) 218(W) x 210(H) x 140(L)

  • Page 107: Limited Warranty Statement

    1 year A. Extent of Limited Warranty 1. Hi-Touch Imaging Technologies (HiTi) warrants to the end-user customer that the HiTi products specified above will be free from defects on materials and workmanship for the duration specified above, which duration begins on the date of purchase by the customer.
  • Page 108 standard time and materials charges to service the printer for the particular failure of damage. 5. If HiTi receives, during the applicable warranty period, notice of a defect in any software, media, or ink cartridge product, which is covered by HiTi's warranty, HiTi shall replace the defective product.
  • Page 109 1. To the extent that this Warranty Statement is inconsistent with local law, this Warranty Statement shall be deemed modified to be consistent with such local law. Under such local law, certain disclaimers and limitations of this Warranty Statement may not apply to the customer.

  • Page 110: Customer Technical Support

    1. Printer S/N. 2. Printer Model No. 3. Printer driver version (you can get it from "Control Panel/Printer/HiTi 63x photo printer/Properties/About") 4. PhotoDesiree version. (you can get version number from PhotoDesiree) 5. Brand name/Model/System configuration of your PC. 6. Windows version (such as Windows 98 se) 7.
  • Page 111 Contact Info Hi-Touch Imaging Technologies. Address: 3F, 31, Shuang-Shih Rd. Sec.3, Pan-Chiao City, Taipei County 220, Taiwan Tel: +886-2-82583060 FAX: +886-2-82583062 Web: http://www.hi-ti.com E-mail: csd@hi-ti.com...

This manual is also suitable for:

63xpl

Table of Contents