Power Cord Specifications - Cisco Firepower 1100 Series Hardware Installation Manual

Power Cord Specifications

Note
Table 3: Firepower 1100 Series PIDs
PID
FPR1120-NGFW-K9
FPR1140-NGFW-K9
FPR1150-NGFW-K9
FPR1K-RM-SSD200
FPR1K-RM-SSD200=
FPR1K-CBL-MGMT
FPR1K-CBL-MGMT=
FPR1K-RM-ACY-KIT
FPR1K-RM-BRKT=
FPR1K-RM-FIPS-KIT

Power Cord Specifications

Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the security appliance. The jumper power cords for use in racks are available as an optional
alternative to the standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Note
The following power cords are supported.
Cisco Firepower 1100 Series Hardware Installation Guide
12
See the show inventory command in the
ASA Series Command Reference
Only the approved power cords or jumper power cords provided with the chassis are supported.
Cisco Firepower Threat Defense Command Reference
to display a list of the PIDs for your Firepower 1100.
Description
Cisco Firepower 1120 NGFW appliance
Cisco Firepower 1140 NGFW appliance
Cisco Firepower 1150 NGFW appliance
Cisco Firepower 1100 200-GB drive
Cisco Firepower 1100 200-GB drive (spare)
Cisco Firepower 1100 cable-management brackets
Cisco Firepower 1100 cable-management brackets
(spare)
Cisco Firepower 1100 accessory kit
Cisco Firepower 1100 rack-mount brackets (spare)
Cisco Firepower 1100 FIPS kit
Overview
or the Cisco