Setpoints; Leaving Fluid Control & Customer Input Control Menu - Baltimore Aircoil Company TrilliumSeries TRF Operation & Maintenance Manual

Setpoints

Leaving Fluid Control & Customer Input Control Menu
With the parameters that can be set in this menu, the user can finetune the behavior of the unit. The Leaving Fluid Control tab
shown in Figure 37 is only visible if the Control Type is Leaving Fluid Control. The Customer Input Control tab shown in Figure
38 is only visible if the Control Type is Customer Input. The Customer Input Control mode allows the user to provide an analog
input signal to control the unit's capacity between 0% and 100%. Table 11 lists the parameters available in Setpoints menu,
Leaving Fluid Control and Customer Input Control.
Figure 37. Setpoints Menu, Leaving Fluid Control
TrilliumSeries™ Adiabatic Cooler - TRF Operation & Maintenance Manual – User Interface
Page | 52