Table of Contents
Advertisement
Fan and Motor Removal & Installation
The following procedure is for field removal and installation of a fan and motor assembly.
1.
Turn off power on the unit.
a.
Turn power off at the main breaker and follow lock out/tag out procedures.
b.
Before disconnecting any power wires, use a multi-meter to verify that there is no voltage.
2.
Remove the fan cover plate by removing the four fasteners as shown in Figure 15.
3.
Remove the terminal box cover by removing the four fasteners as shown in Figure 16.
TrilliumSeries™ Adiabatic Cooler - TRF Operation & Maintenance Manual – Component Information & Maintenance
Figure 15. Fan Cover Plate
Figure 16. Terminal Box Cover
Page | 31
Advertisement
Table of Contents
