Perkins 1204EA-E44TA Operation And Maintenance Manual page 103

M0135751
Illustration 66
Typical example
• A
1. Set the fan tip clearance at position (1) to 16 mm
(0.63 inch).
2. Set the fan tip clearance at position (4) to 12 mm
(0.47 inch).
3. Fan tip clearance at position (2) and (3) must be
14 ± 2 mm (0.55 ± 0.079 inch).
4. Fill the cooling system, for more information refer
to this Operation and Maintenance Manual, "Fluid
Recommendations" for coolant specification.
5. Operate the engine, allow the engine to reach
normal operating temperature. Stop the engine.
Check the coolant level, refer to this Operation
and Maintenance Manual, "Coolant Level - Check"
for more information.
6. Check the fan tip clearance in position (1) and
position (4). The fan tip clearance should be
14 ± 2 mm (0.55 ± 0.079 inch).
is the fan tip clearance 7. Fan tip clearance at position (2) and (3) must be
14 ± 2 mm (0.55 ± 0.079 inch).
In Service Information
Ensure that the engine is stopped. Ensure that the
cooling system is full.
103
Maintenance Section
Fan Clearance - Check
g03609316