Raider RD-PSH01 User Manual page 15

noise.
7.2. When working ruggedized careful not to overload the motor. Overload rotation speed
of the motor falls and the sound thereof is changed. In this case, stop, release the lever for
inclusion (4) and adjust the cutting speed. Otherwise performance will be reduced and the
machine could be damaged.
7.3. When cutting close to the edges careful not to pinch pruning shears with foreign
objects.
7.4. The productivity of cutting depends on the thickness, moisture content, length of the
branches, and the speed of cutting. Cutting performance decreases with frequent switching
of pruning shears. To optimize the performance of cutting is recommended more frequent
cutting, increase cutting height and work with moderate speed.
If necessary, repair your pruning shears is best to be performed only by qualified specialists
in the workshops of RAIDER, where only use original spare parts. Thus ensure their safe
operation.
8. Environmental protection.
In order to protect the environment, the power tool, accessories and packaging
must be suitably processed for the reuse of the raw materials contained therein.
Do not dispose of power tools in household waste! According to EU Directive
2012/19 / EC on end-of-life electrical and electronic devices and as a national
law, power tools that can no longer be used must be separately collected and subjected to
appropriate processing to recover the contents in them secondary raw materials.
Battery packs/batteries:
Litium-Ion (Li-ion).
Warning! These battery packs contain cadmium, a highly toxic heavy metal.
Do not dispose of battery packs/batteries into household waste, fire or water. Battery packs/
batteries should be collected, recycled or disposed of in an environmental-friendly manner.
Defective or dead out battery packs/batteries must be recycled according the Directive
2006/66/EC.
15