Raider RD-PSH01 User Manual page 14

14 www.raider.bg
Not for use of the machine for activities other than its intended purpose!
3. Indicator battery charge
Press (2) to show the current charge with three LEDs (1) in different colors:
- Red - the charge is <20%
- Red and yellow LEDs - from 20 - 70%
- All three LEDs are lit - the charge is> 70%
You must charge the battery immediately if you see that only the red LED lights.
• Lithium-ion batteries are fully protected against dilution. Your pruning shears will turn off as
soon as the battery is depleted.
• NOTE: Release the switch or risk permanent damage to the battery.
4. Battery Charge
You must charge the battery before you use your pruning shears for the first time.
• Use only the charger (10), which comes with pruning shears.
• Use the charger only in dry indoors.
• Charge the battery at ambient temperatures of 10 ° - 40 ° C.
• Connect the charger (10) in the mains supply of 230V AC, and plug it to the charger (3).
• The red LED will show the charging status. The battery is fully recharged as soon as all three
LEDs light up.
• Handle can be warm during the charging process. This is normal.
• Turn off your pruning shears from the mains if you do not intend to use it for an extended
period of time.
• Do not plug gap during the charging process.
5. Start the cordless pruning shears.
You must charge the battery before using your scissors for the first time.
• Use only the charger that comes with the scissors.
• Use the charger only in dry indoor areas.
• Plug the charger into a 230V AC mains supply and insert the charging socket into the battery
compartment (6). The battery is fully charged as soon as all three LEDs are lit (4).
• Do not turn on the scissors during the charging process.
• To switch on your pruner, first press the on / off button (5), then press the trigger lever (2) twice.
Press and hold the start switch lever (2) to stop the machine. To turn off the machine completely,
press the on / off button. (5)
6. Maintenance and Storage
6.1. When not in use store the machine within reach of children;
6.2. Always clean the remnants of grass and shrubs on the cutting head using a brush.
6.3. Apply spray support of the cutting head, in order to prevent rust.
6.4. Insert the appropriate fuse cutting head before storing for a longer period of time.
When you need to perform activities near the knife, work always with protective gloves!
Perform maintenance procedures regularly to ensure your long-term and reliable use of pruning
shears. Check periodically for visible defects such as loose or damaged blade and loosened screw
connections. Make sure that the covers and safety equipment are in working and installed correctly.
To clean the instrument, use only mild soap and a damp cloth to clean the instrument. Do not
immerse the instrument in water and wash it with a hose. Do not allow any liquid to enter inside it.
Do not clean with high pressure cleaner.
7. Practical tips:
7.1. Observe local regulations for the time of day during which you can use the machine outdoors.
In some countries it is prohibited cutting the morning before 08.00 hours, in the afternoon between
2:00 p.m. to 16:00 hours and in the evening after 22.00 hours, to protect citizens from unwanted