Ferroli BlueHelix HiTech RRT H Instructions For Use & Installation page 326

Installer menu [SERVICE]
After selecting the installer menu [Service], press the button
word "1234". Use the buttons
heating to shift position (fig. 17).
Confirm with the button
menus are available:
• [TSP] - Menu for modifying transparent
parameters
• [TEST] - Activation of boiler Test mode.
• [OTC] - Setting of climatic curves for ad-
justment with external probe.
• [Zone] - Settings of climatic curves of ad-
ditional zones.
• [Auto Setup] - This menu is used to acti-
vate calibration. Visible only with param-
eter b27 set to 5.
326
and DHW to set the cell value, and the buttons
PASSWORD
0 0 0 0
fig. 17- Password entry
to access the installer menu[SERVICE] screen where the following
cod. 3541V484 - Rev 00 - 07/2022
BlueHelix HiTech RRT H
. To continue, enter the pass-
PASSWORD
1 2 0 0
SERVICE
TSP
Test
OTC
Zone
Auto Setup
fig. 18
and
EN