Table of Contents
Advertisement
Sensor – Power Options
•
Battery Power: When the wireless sensor is
powered by the included four AA Lithium bat-
teries the sensor has a typical operational life
of two years.
Line Power: When the wireless sensor is
•
powered by external line power (24VAC).
Battery Compartment
(4 AA Lithum Batteries)
Figure 3. Wireless Sensor Battery
Compartment
Sensor – S-Bus Wired Installation Setup
S-Bus connections can be used with M1-8 (IMC),
M2, M3 and M4 Unit Controllers. The sensor can
be used in the following configurations:
•
By itself with a controller (Wired Standalone)
•
In a network with a Lennox Network Control
Panel (NCP)
•
In a network with a third party BACnet Con-
troller – M3/M4 Unit Controllers ONLY.
Sensor – Wired Standalone / NCP Setup
Standalone operation is a consist of (1) Unit
Controller and (1) sensor without a building
automation system (BAS). See Figure 4. Wired
Standalone for wiring connection detail example.
6
Standalone
Advertisement
Table of Contents
Troubleshooting
