Sensor (21L07) - Lennox 21L07 Installation Instructions Manual

Sensor (21L07)

LCS-5030 TMP/RH SENSOR
CATALOG # 21L07
After Hour Override
(AHO) enable switch
Figure 1. Wireless Sensor Buttons and
Indicators
RESET button
BEACON enable button
BATTERY status LED
SIGNAL strength LED
Air Circulation Vents
Figure 2. Wireless Sensor Configuration
NOTE: Changed switch settings only take af-
CAPTIVE screw
NOTE: Switch settings are 1 = ON and 0 = OFF
NOTE: S2 switches 4 and 5 are for future use
5
(Factory Defaults) Label
fect after a sensor power reset. Remove
24VAC or battery power after switch set-
ting changes.
Example:
S1 switch 6 (MODE)
ON = 1 – STAND ALONE
OFF = 0 – NETWORK/BAS (DEFAULT)
and have not affect on sensor operations.