Foot Print With Connections - AGFA ANAPURNA M4F M4F Site Preparation Manual

Global Services North America
Wilmington MA 01887
Foot Print and Working Area:
Power and Air Connection Points:
The power/air connection points are indicated in the diagram above with the letters
A
– The power cable entry point lower chassis – near the rear left leveling foot.
B
– Electrical terminal block location inside the printer, where the power cable connects.
NOTE: The distance between point
approximately 9 feet. Note: Add enough cable; wall outlet or electrical drop plus the 9 feet.
C
– Air line connection, outside rear right. A 6 mm OD tube is provided with the printer.
* Floor space required for standard tables shown above is: 16.4 feet/5m for Depth 18 feet/5.5 m for width.
* The optional extension tables need a floor space of: 16.4 feet/5 m for depth and 28 feet /8.6m for width
Questions? Contact 800-879-2432 and ask for an Anapurna Specialist
A B
and or power cable length inside the printer is
Dock & building access
A B
,
C
, and
5