Other Hazards - Novanta vi30 User Manual

OTHER HAZARDS

noncombustible material as the beam block. Never use organic material or metals as the beam blocker;
organic materials, in general, are apt to combust or melt and metals act as specular reflectors which may
create a serious hazard outside the immediate work area.
Always wear safety glasses or protective goggles with side shields to reduce the risk of damage
to the eyes when operating the laser.
The use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure
Never use organic materials or metals as a beam blocker. There are very few exceptions, eg. Black
anodized metal such as aluminum because this is non reflective surface.
Other hazards
The following hazards are typical for this product family when incorporated for intended use:
(A) risk of injury when lifting or moving the unit; (B) risk of exposure to hazardous laser energy through
unauthorized removal of access panels, doors, or protective barriers; (C) risk of exposure to hazardous
laser energy and injury due to failure of personnel to use proper eye protection and/or failure to adhere
to applicable laser safety procedures; (D) risk of exposure to hazardous or lethal voltages through
unauthorized removal of covers, doors, or access panels; (E) generation of hazardous air contaminants
that may be noxious, toxic, or even fatal.
Warning: Serious Personal Injury
PAGE | 16