Advertisement
voltage drop occurring on the battery cables,
optimizing the entire charging process.
4. Temperature sensor - Connection 1
Connection Pins 4 and 5 have no polarity and can
be connected to the temperature probe either
way.
The use of external temperature probes (TS002) is
optional but allows the
make automatic micro-adjustments to the charging
curve, variable according to battery temperature, for
optimal charging even in complex situations.
5. N-BUS devices with integrated temperature
monitoring, such as the TEMPRA Lithium Battery,
do not require external probes usage; the of data
e xc h a n g e a n d t h e c h a r g i n g c u r v e m i c r o -
adjustments, take place automatically.
6. Temperature sensor - Connection 2
Connection Pins 4 and 5 have no polarity and can
be connected to the temperature probe either
way.
7. Not used.
8. Remote Charging Status Signal
This output pin generates a 0V e 12V signal that
notifies the
0V =
POWERSERVICEPSB
12V =
POWERSERVICEPSB
12.LED INDICATOR (REF. I)
POWERSERVICEPSB
indicator to show the device working status (Fig. 3 - Ref.
I).
POWERSERVICEPSB
is equipped with one LED
POWERSERVICEPSB
status.
not active.
charging.
20
to
Advertisement
