Advertisement
Quick Links
Advertisement
Related Manuals for NDS PF12CH25S – 12V 25A
Summary of Contents for NDS PF12CH25S – 12V 25A
- Page 1 Power Charger Pro Professional Power Chargers Operation Manual...
- Page 2 INTRODUCTION This manual contains important operating and safety instructions, before starting to use the battery charger it is important to read and understand the safety instructions in this manual. Safety notes – Before each use please check the battery charger, the connection cable and the connector.
- Page 3 The information in this manual may be subject to modifications without any prior notification. NDS Energy reserves the right to make changes and improvements to the product at any time without notice and without obligation to relate these changes to previously distributed devices.
- Page 4 CHARGING CURVE SELECTION Before installing and using the charger, please set the most suitable charging curve for the type of battery to be charged. The charger is equipped with DIP-SWITCHES to select various charging curves, as shown in the following table: PHASES DESCRIPTION IUIa - AGM For AGM batteries...
- Page 5 Battery charger with 3 LEDs LED status Indication Constant or flashing Battery with inverted poles or too high voltage Constant YELLOW On charge Battery disconnected or too Flashing YELLOW low voltage Constant GREEN Battery charged Battery charger with 5 LEDs LED status Indication Flashing RED...
- Page 6 MODELS PF12CH25S – 12V 25A Description Technical Features Input voltage 100VAC – 240VAC ±10% Universal Frequency 50Hz - 60Hz Output - Boost Charge 14,4V (2,4V/Cell) Output - Float Charge 13,5V – 13,9V (2,27V/Cell) Output current 25A ±0,5A Short-circuit protection Auto reset at the end of short-circuit condition Reverse polarity protection Auto reset at the end of reverse polarity condition Additional protections...
- Page 7 SYMBOLS Warning, handle this device very carefully Read carefully and follow the instructions for use, maintenance and safety before using the battery charger. A use other than that indicated in the manual or not following these instructions may result in electric shock, fire and / or serious injury.
-
Page 8: Warranty
WARRANTY The manufacturer guarantees the proper functioning of the Power Charger Pro and undertakes to make the free replacement of parts that deteriorate for construction defects within 24 months from the date of purchase, as evidenced by the validation card (to be filled in all its part and send back to the manufacturer). The defects resulting from improper installation, use, tampering or negligence shall not be covered by warranty.