Advertisement
10. EXTRA SELECTIONS
Dip switches 5,6,7,8 are dedicated to some extra
selections for the
Dip Switch 5: silent mode
Useful if you don't want to be disturbed by the
POWERSERVICEPSB's cooling fan or alarm and you
have low power consumption. By activating this mode,
the maximum charging current may be reduced by the
POWERSERVICEPSB
Silent mode can be activated from the dip switch on
the POWERSERVICEPSB, or via the display and/or
mobile app if a Bluetooth N-BUS device is present in
the N-BUS network (such as Tempra Lithium Battery)
Silent mode ON
Dip Switch 6: input current limit
T h i s s e tt i n g l i m i t s t h e i n p u t c u rre n t to t h e
POWERSERVICEPSB
below for more details. It can be useful when the power
source (e.g.: Alternator) is not so powerful, this setting
can be activated in order not to stress the system. This
function can only be activated by the Dip Switch 6, can
not be activated by the Controller (DTB01 or App).
Current limit ON
POWERSERVICEPSB
to safeguard its integrity.
Silent mode OFF
by 50% please see the table
Current limit OFF
17
setup.
Advertisement
