Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Maxtang BW-35
Summary of Contents for Maxtang BW-35
- Page 1 BW-35 Disk Size SBC Motherboard...
- Page 2 Copyright © 2021 Shenzhen Maxtang Computer Co., Ltd. All rights reserved. No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Shenzhen Maxtang Computer Co., Ltd (hereinafter referred to as “Maxtang”).
- Page 3 Shenzhen Maxtang Computer Co., Ltd BW35 Motherboard User Manual (Version 1.0) Version: Description Issue Date: Initial version (EN) 2020/07/24 V1.0 Updated the USB ports to three USB3.0 and one USB2.0 2020/09/15 Updated to support 12V/19V DC-in power supply 2021/10/28...
-
Page 4: Table Of Contents
Shenzhen Maxtang Computer Co., Ltd Contents Chapter 1 Product Introduction ............3 1.1 Brief Introduction ......................3 1.2 Parameters ........................3 1.3 Connector Diagram ......................4 Chapter 2 Hardware ................5 2.1 Jumper Setting ........................5 2.2 Memory Slots ........................5 2.3 Display Interfaces ......................5 2.4 Expansion (screen printing: M.2_E) ................7... -
Page 5: Chapter 1 Product Introduction
Shenzhen Maxtang Computer Co., Ltd Chapter 1 Product Introduction 1.1 Brief Introduction The BW35 motherboard is a 3.5" SBC (Single Board Computer) based on the Intel Haswell-U/Broadwell-U platform, small formed, low power consumption, and high performance. 1.2 Parameters Haswell-U: ⚫... -
Page 6: Connector Diagram
Shenzhen Maxtang Computer Co., Ltd 1.3 Connector Diagram USB2.0 USB3.0 AUDIO HDMI+DP USB3.0 DC_IN LAN1 LAN2 USB2.0 COM14 SO-DIMM GPIO COM5_6 M.2_E JPOWE MSATA/3G/4G EDP/LVD EDP_E L_BKL CPUFA PWSAT L_VCC/ADJ CLK_CMOS... -
Page 7: Chapter 2 Hardware
Shenzhen Maxtang Computer Co., Ltd Chapter 2 Hardware 2.1 Jumper Setting Please configure the jumpers according to your requirements before installing the hardware. How to identify the first header of jumpers and pins: Observe the mark beside the jumper or pins and find the header marked by “1”... - Page 8 Shenzhen Maxtang Computer Co., Ltd Close Turn on LVDS function LVDS Backlight Adjustment Pin (Screen printing: L_BKL) Signal LCD_BKL_ADJ LCD_BKL_ON LVDS working voltage and backlight control pin (Screen printing: L_VCC/ADJ) Setting Function Close VCC(+3.3V) Close VCC(+5V) Close Backlight Control Standard...
-
Page 9: Expansion (Screen Printing: M.2_E)
Shenzhen Maxtang Computer Co., Ltd Open Turn off eDP function Close Turn on eDP function eDP Backlight Adjustment Pin (Screen printing: L_BKL) Signal LCD_BKL_ADJ LCD_BKL_ON eDP working voltage and backlight control pin (Screen printing: L_VCC/ADJ) Setting Function Close VCC(+3.3V) Close... -
Page 10: Lan
Shenzhen Maxtang Computer Co., Ltd (N/A) 2.7 LAN The board provides two RJ45 high-performance Intel i211 Gigabit Ethernet controllers, supports Magic packet wake-up. The LAN1 (i211) also supports PXE network boot. LED Status Indicators: LI_LED Status (Green) Function ACT_LED Status (Orange) -
Page 11: Audio Interface
Shenzhen Maxtang Computer Co., Ltd COM5_DATA- COM6_DATA- COM5_DATA+ COM6_DATA+ 2.9 Audio Interface Realtek ALC662 HD audio chip equipped, provides a 3.5mm Line-out/MIC 2 in 1 combo jack (CTIA American standard), and a built-in dual-channel power amplifier output socket for connecting passive speakers. -
Page 12: Lpc
Shenzhen Maxtang Computer Co., Ltd SIO_GP72 SIO_GP75 SIO_GP73 SIO_GP76 SIO_GP77 2.12 LPC The board provides a set of LPC pins (2.0mm spacing. Low Pin Count Interface) for connecting external LPC devices as an optional feature. LPC (screen printing: LPC) Signal... -
Page 13: Hardware Auto Start (Screen Printing: Jat)
Shenzhen Maxtang Computer Co., Ltd CPUFAN_TAC CPUFAN_CTL 2.15 Hardware Auto Start (Screen Printing: JAT) JAT (Screen Printing: JAT) Setting Close Hardware Auto Start Please note that this jumper’s function is similar to the BIOS’s “Restore AC Power Loss” function. When the latter is set to power on, the device will also start automatically after power is connected.
Need help?
Do you have a question about the BW-35 and is the answer not in the manual?
Questions and answers