Table of Contents
Advertisement
Dakota Ultrasonics
The ALRM key has two functions. By holding down the ALRM key
when powering up the DX-2, the audible beeper will be turned on or off
accordingly. After the unit has been turned on, pressing the ALRM key will
toggle the alarm mode to the on/off positions and allow the user to enter a
nominal thickness value. Refer to page 19 for details on how to use the
alarm feature.
The DIFF key is used to enable or disable the Differential mode and
allow the user to enter a nominal value as a comparison against actual
thickness measurements. Refer to page 20 for a complete explanation of
this feature.
The SEND key is used to send the currently displayed thickness
measurement to an external storage device via the DX-2's RS232 port.
Refer to page 21 for an explanation of how to use this feature.
6
Advertisement
Table of Contents
