PASCO PS-3217 Instruction Manual

Included Equipment
Wireless Oxygen Gas Sensor
Oxygen Gas Sensing Element
250 mL Sample Bottle
Micro USB Cable
Required Equipment
SPARKvue or PASCO Capstone software
Introduction
The Wireless Oxygen Gas Sensor measures oxygen gas
concentration in percent (%) and parts per million (ppm)
oxygen. The sensor also measures temperature, relative
humidity, and absolute humidity. It can be used to study
cellular respiration, photosynthesis, air quality, oxygen
cycling, and the rate of oxygen production in chemical
reactions.
800-772-8700
Wireless Oxygen Gas Sensor
Part Number
PS-3606
SE-6938
PS-3584
PS-3217
Using the sensor for the first time
Perform the steps below when using the sensor for the
first time. Detailed steps of each procedure are found in
separate sections of the instruction sheet.
1. Install the sensing element.
2. Charge the battery.
3. Connect the sensor to software.
4. Calibrate the sensor.
Instruction Sheet
012-16215A
www.pasco.com