Advertisement
Quick Links
PS-3238; Wireless Geiger Counter Battery Replacement Instructions
Battery part number PS-3295; Li-Poly 1000 mAH
Recommended Equipment: (PS-3299; Battery Replacement Tool Set)
Step 1:
Position the Sensor on a surface as shown. Note the location of the (4) Torx T5
Screws.
Step 2:
Unscrew and remove the 4 Screws with the Torx T5 Screwdriver.
PASCO Form Number
013-17795
Description
PS-3238 Battery Replacement Instructions
Date
4-30-24
Page 1 of 3
Revision
A
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PASCO PS-3238
Summary of Contents for PASCO PS-3238
- Page 1 PS-3238; Wireless Geiger Counter Battery Replacement Instructions Battery part number PS-3295; Li-Poly 1000 mAH Recommended Equipment: (PS-3299; Battery Replacement Tool Set) Step 1: Position the Sensor on a surface as shown. Note the location of the (4) Torx T5 Screws.
- Page 2 T5 Screwdriver and remove the battery strap. Remove the battery and add the replacement battery. Plug the battery into its mating connector and reverse the steps noted above to complete the reassembly. PASCO Form Number Description Date Revision 013-17795 PS-3238 Battery Replacement Instructions 4-30-24 Page 2 of 3...
- Page 3 If you need further assistance, please contact Technical Support at support@pasco.com through www.pasco.com on chat. To access chat through your browser, please enable all cookies on our website. PASCO Form Number Description Date Revision 013-17795 PS-3238 Battery Replacement Instructions 4-30-24 Page 3 of 3...
Need help?
Do you have a question about the PS-3238 and is the answer not in the manual?
Questions and answers