Maintenance; Cleaning - Hatco HDW-1R2 Series Installation & Operating Manual

MAINTENANCE

CLEANING

Hatco Drawer Warmers are designed for maximum
durability and performance, with minimum
maintenance.
WARNING
To avoid any injury, turn the power switch off
at the fuse disconnect switch/circuit breaker or
unplug the unit from the power source and allow
to cool completely before performing any
maintenance or cleaning.
To preserve the finish of the Drawer Warmer, it is
recommended that the surfaces be wiped daily with
a damp cloth. Food pans should be removed and
washed. Stubborn stains may be removed with a good
non-abrasive cleaner. Hard to reach areas should be
cleaned with a small brush and mild soap.
CAUTION
Use only non-abrasive cleaners. Abrasive cleaners
could scratch the finish of your unit marring
its appearance and making it susceptible to
soil accumulation.
WARNING
To avoid electric shock or personal injury, do not
steam clean or use excessive water on the unit.
Form No. HDW1R2M-0502
If service is required on this unit, contact your
Authorized Hatco Service Agent, or contact the
Hatco Service Department at 800-558-0607 or
414-671-6350; fax 800-690-2966 or International
fax 414-671-3976.
This product has no "user" serviceable parts.
To avoid damage to the unit or injury to personnel,
use only Authorized Hatco Service Agents and
Genuine Hatco Parts when service is required.
Genuine Hatco Replacement Parts are specified to
operate safely in the environments in which they are
used. Some aftermarket or generic replacement parts
do not have the characteristics that will allow them
to operate safely in Hatco equipment. It is essential
to use Hatco Replacement Parts when repairing
Hatco equipment. Failure to use Hatco Replacement
Parts may subject operators of the equipment to
hazardous electrical voltage, resulting in electrical
shock or burn.
6
WARNING
WARNING
WARNING