Model Description; Hdw-1R2 Model; Specifications; Plug Configuration - Hatco HDW-1R2 Series Installation & Operating Manual

MODEL DESCRIPTION

HDW-1R2 MODEL

The HDW-1R2 Model model is a single cavity unit with
two individual drawers designed to keep food products
hot and flavor-fresh until served. The model is
constructed of rugged stainless steel with durable nylon
rollers, 16-gauge stainless steel slides and heavy-duty
hardware. Each drawer features an adjustable
temperature control and temperature monitor. A recessed
on/off switch controls the power for the complete unit.
The insulated top and sides provide maximum
energy efficiency.

SPECIFICATIONS

PLUG CONFIGURATION

Units are supplied from the factory with an electrical
cord and plug installed. Plugs are supplied according to
the applications as shown in Figure 2.
WARNING
Plug unit into a properly grounded electrical outlet
of the correct voltage, size and plug configuration.
If the plug and receptacle do not match, contact
a qualified electrician to determine the proper
voltage and size and install the proper
electrical outlet.
Form No. HDW1R2M-0502
Figure 1. Model HDW-1R2
Figure 2. Plug Configuration
2
NEMA 5-15P