Table of Contents
Advertisement
VL1600 ProfiLe
NOTE: When the luminaire is not connected to power and the LCD menu is operating on battery, this proximity
sensor is disabled.
SELF TESTS
RUNNING PARAMETER TESTS
The luminaire is capable of running self tests by using the TEST menu functions.
When running tests on multiple luminaires, a DMX termination connector is required at the last luminaire in the
link.
to run tests:
Step 1.
Press [ESC].
Step 2.
Press [Up] / [Down] arrows until Test appears. Press [OK].
Step 3.
Use [Up] / [Down] arrows to select a parameter to test.
Step 4.
Press [OK] to run test.
Step 5.
Press [ESC] to stop test at any time.
NOTE: Connected luminaires may not respond on the first action (may delay) of the master luminaire.
MOVEMENT DISABLE
The Movement option allows pan and tilt to be disabled so that the luminaire can be placed in any position for
testing without movement occurring. In order to regain full control of the luminaire, Movement will need to be
enabled after testing.
NOTE: When using the Movement option, pan and tilt will be disabled for all the luminaires that are linked.
to set movement option:
Step 1.
Press [ESC].
Step 2.
Press [Up] /[Down] arrows until Config appears. Press [OK].
Step 3.
Press [Up] / [Down] arrows until Pan/Tilt appears. Press [OK].
Step 4.
Movement will be displayed. Press [OK].
Step 5.
Use [Up] / [Down] arrows to select Enable or Disable. Press OK] to select.
DIAGNOSTIC TESTS
The following diagnostic tests are available in the test menu. Press [Menu] at anytime to stop test.
TEST NAME
all Test ...................
Pan/Tilt .....................
Pan.....................
Tilt.......................
Intensity ..........
Color Flag Test ..........
Color Wheel 1 ..........
Color Wheel 2 ..........
Color Wheel 3 ..........
USB LOGGING
The VL1600 Profile Luminaire stores error messages in a log file within the luminaire. This information along
with specific luminaire settings can be saved as a .csv (comma-separated values) file to a USB flash drive con-
nected to the USB port.
DISPLAY
running 'all TesT'
running 'Pan TIlT TesT'
running 'Pan TesT'
running 'TIlT TesT'
running 'InTensITY TesT'
running 'COlOr FlaG TesT'
running 'CW 1 TesT'
running 'CW 2 TesT'
running 'CW 3 TesT'
33
user manuaL
w w w.Va r i - L i t e .c o m
Advertisement
Table of Contents
