Scott SOLDIER 2 User Manual page 6

The label contains the following
SCOTT SOLDIER 2
ELBOW GUARDS
/ /
M
A
B C
EN 1621-1:2012
TYPE A & B
1
Applicable to all joint impact protectors. Type A is the
standard dimensions of protection for the average user.
Type B has an additional wider area of protection compared
to type A.
LEVEL
The performance is based on the amount of impact transmission measured in kN (kilo Newton).
The EN 1621-1:2012 (shoulder, elbow, knee, hip, leg) standard provides 2 levels of protection: level 1
2
and level 2. Level 1 protectors shall have an overall mean value below 35kN, each single strike shall
not exceed 35kN in the area I, and 50kN in the area II and III. Level 2 protectors shall have an overall
mean value below 20kN, each single strike shall not exceed 20kN in the area I, and 30kN in the area
II and III.
Level 2 protectors offers higher performance than Level 1 protectors.
Level 2 protectors offer the highest level specified by the CE standard. Due to the extra level of
protection Level 2 protectors may be heavier, thicker and less ergonomic than the Level 1 protectors.
It is up to the responsibility of the rider to choose the correct level of protection according to their
needs, their experience, their performance and skills.
TEMPERATURE
3
T+ means the protection is tested and certified for temperatures up to +40 degrees Celsius.
T- means the protection is tested and certified for temperatures down to –10 degrees Celsius.
All SCOTT protections are certified with ambient and wet conditioning. Wet conditioning testing is
used to simulate the high humidity experienced during sports.
• VII. HOW TO ADJUST YOUR PROTECTOR
CHOOSING YOUR CORRECT SIZE
It must be chosen in reference to the size indicated in the fol-
lowing size chart or on the garment itself. SCOTT Sports SA
shall not accept any complaints arising from the use of an
incorrect fitted protector.
ENGLISH - 6
Name of the model of the product
The CE marking ensures compliance with the essential
requirements of Directive 89/686/EEC
Icon indicates the specific sport in which the protector is
designed to be used: motosports, bike, wintersports
/
Protector size and additional body measurements and fit
A: Category and type of protection
Category: S: shoulder & forearm, E: elbow, K: knee & upper
tibia, H: hip, L: leg Type: A, B
B: Level of protection
D
C: T+: High temperature impact test passed
D: T-: Low temperature impact test passed
Reference for Personal Protective Equipment that is in
compliance with the European harmonized technical
standard used in the design and CE certification
Warning! The end user should carefully read the instruction
before using the product (PPE)
1
2
A
A
I II
ELBOW
3
3
B
B
III I II III
KNEE