Configuration Terminal Display Problems; No Display; Garbled Display - H3C S6826 Series Installation Manual

Configuration terminal display problems

No display

Symptom
The configuration terminal displays nothing when the switch is powered on.
Solution
To resolve the issue:
1. Verify that the power system is operating correctly.
2. Verify that the console cable is connected correctly.
3. Verify that the console cable does not have any problems and the terminal settings are correct.
4. If the issue persists, contact H3C Support.

Garbled display

Symptom
The configuration terminal has a garbled display.
Solution
To resolve the issue:
1. Verify that the following settings are configured for the terminal:
Baud rate—9,600.

Data bits—8.

Parity—None.

Stop bits—1.

Flow control—None.

2. If the issue persists, contact H3C Support.
4-30