Xerox Phaser 340 Cleaning page 3

6.
If one or more of the color bars are still missing, repeat the
cleaning sequence by pressing the Clean button once again.
When cleaning ends, the printer outputs a cleaning page that you
may discard as normal office waste.
If the second cleaning sequence does not cure the light stripes or
missing colors problem, you can press the Clean button for a
third time to repeat the cleaning sequence.
7. If your prints still have color stripe problems after the third
cleaning sequence, service may be required.
8.
Return the printer to normal operation by pressing the
Source: 070-9101-03 C4
button.
Exit Exit