Model Descriptions; All Models; Gr3Sdh Models; Gr3Sds Models - Hatco GR3SDH-27 Installation And Operating Manual

MODEL DESCRIPTION
ALL GR3SD MODELS
All GR3SD Models feature a thermostatically
controlled hardcoated heated base and glass dual
heat source which conducts heat upward to keep
the food on the glass shelf warm, and radiates heat
downward to blanket the product below. Units also
include tempered glass side panels, product divider
rods, fluorescent display lights, and a cord and
plug set.

GR3SDH MODELS

The GR3SDH Models are horizontal shelf warmers
designed to hold hot wrapped or boxed food
Figure 1. Glo-Ray Model GR3SDH - Single Shelf
product.
These models are available in widths of 27-1/4,
33-1/4 and 39-1/4 inches (692, 845 and 997 mm)
and are available with a single or dual heated glass
shelf.

GR3SDS MODELS

The GR3SDS Models are slant shelf warmers
designed to hold hot wrapped or boxed food
product. The shelves are slanted for convenience of
self-serve.
These models are available in widths of 27-1/4,
33-1/4 and 39-1/4 inches (692, 845 and 997 mm)
and are available with a single or dual heated glass
Figure 2. Glo-Ray Model GR3SDS - Dual Shelf
shelf.

SPECIFICATIONS

PLUG CONFIGURATIONS

Units are supplied from the factory with an electrical
cord and plug. (See Figure 3.)
WARNING
Plug unit into a properly grounded electrical NEMA 5-15P NEMA 5-20P
outlet of the correct voltage, size and plug
configuration. If the plug and receptacle do not
match, contact a qualified electrician to
determine the proper voltage and size and install
the proper electrical outlet.
NEMA L14-20P NEMA 14-20P
(Optional)
Figure 3. Plug Configurations
3 Form No. GR3SDM-0606