Page 1
GLO-RAY ® Fried Product Holding Warmer GRJW Series Installation & Operating Manual & Replacement Parts List I&W #07.05.106.00 This manual contains important safety information Este manual contiene importante información sobre concerning the maintenance, use and operation of this seguridad concerniente al mantenimiento, uso y product.
Every unit is thoroughly inspected appearing in this manual be read prior to installation and tested prior to shipment. or operation of your Hatco Fried Product Holding Form No. GRJWM-0406...
Some aftermarket or generic replacement parts do not have the characteristics that will allow them to operate safely in Hatco equipment. It is essential to use Hatco Replacement Parts when repairing Hatco equipment. Failure to...
6' (1828 mm) cord and plug set. GRJW-2T MODEL The GRJW-2T model features a flip up door or sliding pullout drawer assembly and comes with a pan holder equipped to hold up to two 1/3 size pans, 2-1/2"...
SPECIFICATIONS ELECTRICAL RATING CHART Model Voltage Watts Amps Plug Configuration Shipping Weight GRJW-2T NEMA 5-15P 41 lbs. (19 kg) GRJW-3T NEMA 5-15P 50 lbs. (23 kg) GRJW-4P NEMA 5-15P 57 lbs. (26 kg) NOTE: Shipping weight includes packaging. PLUG CONFIGURATIONS Units are supplied from the factory with an electrical cord and plug installed.
INSTALLATION UNPACKING Glo-Ray ® Fried Product Holding Warmers are shipped with most components pre-assembled. Care should be taken when unpacking shipping carton to avoid damage to unit and components enclosed. WARNING To avoid any injury or damage to the unit do not pull unit by power cord.
OPERATION CAUTION Screw/Slide Some exterior surfaces on the unit will get hot. Use caution when touching these areas to avoid Adjustment Screw injury. 1. Plug unit into a properly grounded electrical outlet of the correct voltage, size and plug configuration (see SPECIFICATIONS details).
(See Figure 6.) safely in Hatco equipment. It is essential to use Hatco Replacement Parts when repairing Hatco 3. Lift drawer up and out of slides to remove.
W= Warmer 2 = Two 1/3 Size Pans T = Taco CAUTION - Use of replacement parts other than those supplied by Hatco Corporation may result in damage to the unit or injury to personnel. PARTS SPECIFIC TO GRJW-2T MODELS-120 VOLT...
W= Warmer X = Number of 1/3 Size Pans T = Taco 17A, 17B CAUTION - Use of replacement parts other than those supplied by Hatco Corporation may result in damage to the unit or injury to personnel. Form No. GRJWM-0406...
Page 11
Used on GRJW-2T units manufactured before the eighteenth week of the year 2002. Used on GRJW-2T units manufactured during or after the nineteenth week of the year 2002. NOTE: The last four digits in a ten digit numerical serial number is the manufacturing date code.
4 = Four 1/3 Size Pans P = Protein CAUTION - Use of replacement parts other than those supplied by Hatco Corporation may result in damage to the unit or injury to personnel. PARTS SPECIFIC TO GRJW-4P MODELS - 120 VOLT ITEM DESCRIPTION PART NO.
One (1) Year Parts and Labor PLUS Four accept or reject any such claim in whole or in part. (4) Years Parts-Only Warranty on Hatco will not accept the return of any Product pro-rated terms that Hatco will explain without prior written approval from Hatco, and all at Buyer’s request:...
HATCO AUTHORIZED PARTS DISTRIBUTORS NEW YORK TEXAS ALABAMA INDIANA Acme American Repairs, Inc. Stove Parts Supply Jones McLeod Appl. Svc. GCS Service Fort Worth 817-831-0381 Birmingham 205-251-0159 Indianapolis 317-545-9655 Brooklyn 718-456-6544 Armstrong Repair Service IOWA Alpro Service Co. ARIZONA Houston...
Need help?
Do you have a question about the GRJW-2T and is the answer not in the manual?
Questions and answers