Solid Tray Inserts; Merchandising Decal Signs/Graphics; Reservoir Auto-Fill - Hatco FLAV-R-SAVOR WFST-1X Installation & Operating Manual

Rotisserie-Style Rack*
Maximum Product Height: 5" (13 cm)
*Rack designed for use with motorized display.

SOLID TRAY INSERTS

A set of five stainless steel tray inserts is available for
the rotisserie-style rack that fits within the wire baskets,
ideal for slabs of ribs.
MERCHANDISING DECAL
SIGNS/GRAPHICS
Self-adhesive merchandising decal signs and graphics
are available to promote your food products. The signs
are designed to be installed on three (3) sides of the
cabinet above the glass panels. Merchandising decal
signs are red and yellow reading "Today's Hot Specials"
and are reusable when utilizing a dry-erase marker.
Graphic decals feature food illustrations of CHICKEN
or RIBS.
Before installing decals, clean the aluminum side panels
with a non-oily cleaner, such as isopropyl alcohol
(rubbing alcohol). After the cleaned surfaces have dried,
simply remove the protective backing from the sign or
decal and apply to the panel. Any air pockets or bubbles
behind the sticker can be removed by rubbing gently
with a soft cloth from the center towards the outer
edges.
Shelves adjust and tilt in 2" (5 cm) increments
Figure 9. Display Racks.
RESERVOIR AUTO-FILL (Optional)
The auto-fill automatically fills the reservoir when the
unit is energized and a low water condition is detected.
The fill cycle is indicated by a red light.
To install, attach the auto-fill quick-connect coupling
supplied with the cabinet to a 1/4" (6 mm) plastic or
copper tube and connect to softened or distilled water
source. See Figure 10. The unit is now operational.
NOTE: The Reservoir Auto-Fill feature cannot be
added to a unit once it is shipped from the factory.
6
ACCESSORIES
4-Shelf Multi-Purpose Rack
Figure 10. Reservoir Auto-Fill.
Form No. WFSTM-0297