Video Connector - Dell PowerEdge 1800 Installation And Troubleshooting Manual

Table B-4. Keyboard and Mouse Connector Pin Assignments
Pin Signal
1 KBDATA or
MFDATA
2 NC
3 GND
4 FVcc
5 KBCLK or
MFCLK
6 NC
Shell N/A

Video Connector

You can attach a VGA-compatible monitor to the system's integrated video controller using a
15-pin high-density D-subminiature connector. Figure B-5 illustrates the pin numbers for the video
connector and Table B-5 defines the pin assignments for the connector.
NOTE:
Installing a video card automatically disables the system's integrated video controller.
Figure B-5. Video Connector Pin Numbers
Table B-5. Video Connector Pin Assignments
Pin Signal
1 RED
2 GREEN
3 BLUE
4 NC
5–8, 10 GND
9 VCC
11 NC
I/O Definition
I/O Keyboard data or mouse data
N/A No connection
N/A Signal ground
N/A Fused supply voltage
I/O Keyboard clock or mouse clock
N/A No connection
N/A Chassis ground
I/O Definition
O Red video
O Green video
O Blue video
N/A No connection
N/A Signal ground
N/A Vcc
N/A No connection
I/O Ports and Connectors
149