Video Connector - Dell PowerEdge systems 6300 User Manual

If you reconfigure your hardware, you may need pin number and signal information for
the mouse connector. Figure B-5 illustrates the pin numbers for the mouse connector,
and Table B-4 lists and defines the pin assignments and interface signals for the
mouse connector.
1 MFDATA
2 NC
3 GND
4 FVcc
5 MFCLK
6 NC
Shell N/A
The system uses a 15-pin high-density D-subminiature connector on the back panel
for attaching a video graphics array (VGA)-compatible monitor to your system. The
video circuitry on the system board synchronizes the signals that drive the red, green,
and blue electron guns in the monitor.
NOTE: Installing a video card automatically disables the system's built-in video
subsystem.
If you reconfigure your hardware, you may need pin number and signal information for
the video connector. Figure B-6 illustrates the pin numbers for the video connector,
and Table B-5 lists and defines the pin assignments and interface signals for the video
connector.
shell
3
5 1
2
6
4
I/O Mouse data
N/A No connection
N/A Signal ground
N/A Fused supply voltage
I/O Mouse clock
N/A No connection
N/A Chassis ground
I/O Ports and Connectors B-7