Table of Contents
Advertisement
Oven use
Sensor Cook instructions
The Auto Sensor allows you to cook your food automatically by detecting the
amount of gases generated from the food while cooking.
•
When cooking food, many kinds of gases are generated. Sensor Cook
determines the proper time and power level by detecting these gases from the
food, eliminating the need to set the cooking time and power level.
•
When you cover a container with its lid or plastic wrap during Sensor Cooking,
the microwave oven will detect the gases generated after the container has
been saturated with steam.
•
Shortly before cooking ends, the remaining cooking time will begin its count
down. This will be a good time for you to rotate or stir the food for even
cooking if it is necessary.
•
Before using Sensor Cook, food may be seasoned with herbs, spices or
browning sauces. A word of caution though, salt or sugar may cause burn
spots on food so these ingredients should be added after cooking.
Utensils & Cover for sensor cooking
•
To obtain good cooking results with this function, follow the directions for
selecting appropriate containers and covers in the charts in this book.
•
Always use microwave-safe containers and cover them with their lids or with
plastic wrap. When using plastic wrap, turn back one corner to allow steam to
escape at the proper rate.
•
Always cover with the lid intended for the utensil being used. If the utensil
does not have its own lid, use plastic wrap.
•
Fill containers at least half full.
•
Foods that require stirring or rotating should be stirred or turned toward the
end of the Sensor Cook cycle, after the time has started to count down on the
display.
22 English
MC457TGRCSR_D2_DE68-04523B-00_EN.indd 22
MC457TGRCSR_D2_DE68-04523B-00_EN.indd 22
Important
•
After installing the oven and plugging into an electrical outlet, do not unplug
the power cord. The gas sensor needs time to stabilize in order to cook
satisfactorily.
•
It its not advisable to use Sensor Cook on a continuous cooking operation, i.e.
one cooking operation immediately after another.
•
Install the oven in a well ventilated location for proper cooling and airflow and
to ensure the sensor will operate accurately.
•
To avoid poor results, do not use Sensor Cook when the room ambient
temperature is too high or too low.
•
Do not use volatile detergent to clean your oven. Gas resulting from this
detergent may affect the sensor.
•
Avoid placing the oven near high moisture or gas emitting appliances, since
this will interfere with the proper performance of Sensor Cook.
•
Always keep the inside of the oven clean. Wipe all spills with a damp cloth.
This oven is designed for household use only.
2021-01-05 오후 1:50:37
2021-01-05 오후 1:50:37
Advertisement
Table of Contents
