Table of Contents
Advertisement
MD – Editing
Editing tips
Before you start editing
You can edit an MD only when:
• The MD is recordable.
• The MD play mode is Normal Play.
Check the following, before editing.
1
Check the tab of the MD to be edited.
Slide the tab to close the slot.
If the MD is protected, you cannot edit the
MD.
2
Press PLAY MODE repeatedly until
both "SHUF" and "PGM" disappear.
You can edit the MD only in Normal Play
mode. You cannot edit the MD in Shuffle or
Program Play mode.
To quit while editing
Press MENU/NO.
After editing
Press Z MD on the unit to remove the MD
or press ?/1 (power) to turn off the system.
"TOC" or "STANDBY" starts flashing. The
TOC is updated and editing is completed.
Before pulling out the mains lead
MD editing is completed when the MD Table of
Contents (TOC) is updated. The TOC is updated
when you eject the MD or press
the system. Do not pull out the mains lead before
updating the TOC or while updating the TOC
(while "TOC" lights up or flashes) to ensure a
complete editing.
Registering tracks in
groups
— Group Function
What is the Group Function?
The Group Function allows you to play, record
and edit the tracks on an MD in groups. For
example, you can register tracks 1 to 5 on an MD
to the "Rock" group, and tracks 6 to 9 to the
"Pops" group. Then you can listen to the tracks
in only the desired group, add new tracks to a
group, and perform other operations. In
addition, the Group Function can be easily
turned on and off simply by pressing GROUP.
Group Function: Off
Group Function: On
?/1
to turn off
MD
Track
1 2 3 4 5 6 7 8 9
MD
Group 1
Track
1 2 3 4 5
Group 2
Track
1 2 3 4
continued
GB
23
Hide quick links:
Advertisement
Table of Contents
