System Reset; Headphone Socket / Specifications - Sangean DPR-17 Manual

System reset

If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Switch on your radio, and press the Band button to choose your
required band.
2. Press and hold the Info button.
3. Rotate the Tuning control until "Factory Reset" is shown on
the display.
4. Press and release the Tuning control, the display will show NO.
Rotate the Tuning control to select YES.
5. Press and release the Tuning control to confirm. The display will
show "Resetting..." and a full reset will be performed and all presets
and station lists will be erased. A quick scan of DAB frequencies will
then be carried out.
In case of malfunction due to electronic discharge, reset the
product (reconnection of power source may be required) to resume
normal operation.
Headphone socket
A 3.5mm Headphone socket located on the left hand side of your radio
is provided for use with either headphones or an earpiece. Inserting a
plug automatically mutes the internal speaker.
29
2
3-5